Key PPWR deadlines: packaging labelling and QR code
Updated: 11 Nov 2026
What applies and from when
Many dates are circulating around the labelling of packaging under Regulation (EU) 2025/40 on packaging and packaging waste (PPWR). It is important to separate two things: the identification details that packaging must carry from 12 August 2026, and the harmonised labels on material and sorting, which will arrive in 2028 at the earliest. This overview summarises the dates that concern packaging records and labelling and shows what Info PPWR covers.
| From | What | Basis |
|---|---|---|
| Applies now 12 Aug 2026 | The Regulation applies. Packaging carries a type, batch or serial number (or another element allowing identification) and the manufacturer's details: name, trade name or trademark, and postal address. For packaging from third countries, the importer's details as well. The manufacturer holds the technical documentation and the EU declaration of conformity. | Art. 15(5) and (6), Art. 18, Arts. 38 and 39, Annexes VII and VIII |
| Applies now 27 Sep 2026 | Ban on generic environmental claims and own "eco" seals without substantiation (Directive 2024/825). Sorting icons serve only as an aid. | Directive (EU) 2024/825 |
| Coming 12 Feb 2027 | The symbol of an extended producer responsibility scheme (for example the Green Dot) may be shown only in a QR code or another standardised open digital technology, not as a printed symbol. | Art. 12(9) |
| Coming end of 2027 | GS1 Sunrise 2027 initiative: store checkouts should be able to read 2D codes, including QR codes with a GS1 Digital Link, alongside the barcode. This is a voluntary industry initiative; individual retailers set the dates. | GS1 |
| Coming 12 Aug 2028 | Harmonised label with the material composition. Applies from 12 Aug 2028, or 24 months after the Commission publishes the implementing act, whichever is later. | Art. 12(1) |
| Coming 12 Feb 2029 | Reusable packaging: label and QR code with the reuse system. Applies from 12 Feb 2029, or 30 months after the implementing act is published, whichever is later. | Art. 12(2) |
| Coming 1 Jan 2030 | Recyclability of packaging (classes under Annex II), minimum recycled content in plastic packaging and packaging minimisation. Until then, the existing requirements apply. | Arts. 6, 7 and 10 |
Dates after 2027 depend on Commission implementing acts, which may be delayed; none had been adopted as of November 2026. If they are published later, the label obligation moves with them.
What counts as packaging under the PPWR
The Regulation's obligations apply only to what it defines as packaging. Packaging is an item, regardless of the material, that an economic operator uses to contain, protect, deliver or present products (Art. 3(1), point 1). So packaging is not only a box or a bottle: it also covers components and ancillary elements (a lid, a label, a closure, a tag attached directly to the product), packaging in services, and single-use items that are filled only at the point of sale.
The Regulation distinguishes four kinds of packaging, each with its own obligations:
- Sales packaging forms a sales unit for the end user at the point of sale (for example a box, bottle or pouch with the product).
- Grouped packaging groups several sales units at the point of sale and can be removed from the product without changing its characteristics (for example the film around a six-pack of bottles).
- Transport packaging facilitates the handling and transport of sales units and protects them from damage (for example a crate or a pallet with film). Road, rail, ship and air containers are not included.
- E-commerce packaging is transport packaging in which a product is delivered to the end user in an online or distance sale.
A novelty compared with the existing rules is that permeable tea and coffee bags and single-serve beverage portions for preparation in a machine, which are used and disposed of together with the product, are expressly considered packaging. Annex I of the Regulation gives examples of how the boundary is interpreted; for many items the purpose of use decides:
| Item | Is packaging | Is not packaging |
|---|---|---|
| Flower pot | when it serves only to sell and transport the plant | when it is used while the plant grows or is sold with the plant |
| Clothes hanger | when sold with the clothing | when sold separately |
| Wrapping paper | when it serves as packaging for a product | when sold separately as goods |
| Bag, cup, plate, carrier bag | when intended to be filled at the point of sale | when sold empty as goods |
Listing in Annex I is only a guide. Packaging is always assessed by the definition and its purpose of use, not by what the item is called. The European Commission's guidance on the Regulation also addresses borderline cases.
In Info PPWR: for a packaging assembly you select the kind of packaging (sales, grouped; transport packaging is being prepared), and each part of the assembly has a material, weight and count. Whether an item is packaging is assessed by the manufacturer; the application does not decide it for you.
What must be on the packaging now
From 12 August 2026 the manufacturer ensures that packaging carries a type, batch or serial number and the manufacturer's details. If the size or nature of the packaging does not allow it, the Regulation permits other solutions, for example giving the details in an accompanying document or via a data carrier. For packaging imported from third countries, the importer's details are added.
In Info PPWR: the packaging is identified by the PACK packaging batch of the packaging assembly version; the QR code in GS1 Digital Link format carries both the product GTIN and PACK and leads to a public page with details on the packaging, the manufacturer and the importer. The company enters the manufacturer's details (name or trademark, address, contact) once, and the system carries them over to the public page, the EU declaration of conformity and the package for the authority.
Extended producer responsibility symbol and QR code
Consumers often confuse symbols such as the Green Dot with a recyclability mark. The Regulation therefore provides that from 12 February 2027, packaging covered by an extended producer responsibility scheme may be marked only with the relevant symbol in a QR code or another standardised open digital technology. The marking itself is voluntary, but if you use it, it can no longer appear on the packaging as a printed symbol.
The Czech Ministry of the Environment states that packaging placed on the market before this date can be sold off. It is therefore important to document the date of placing on the market. Check with the EKO-KOM system how digital marking will be handled before you change your packaging graphics.
In Info PPWR: each batch records the date of placing on the market (from, to). The public page behind the QR code shows participation in the EPR scheme and the client number, so the digital marking is built from data you already hold in your records.
Harmonised label with the material
The label with the material composition, which will help consumers sort correctly, will be mandatory from 12 August 2028 at the earliest, or up to 24 months after the implementing acts are published. The form of the label will be set only by those acts. The same pictograms are to appear on collection containers.
Labelling the share of recycled content or of bio-based plastics is not mandatory. If you state it on the packaging, it must comply with the harmonised rules. The Regulation also prohibits labels and marks that could mislead consumers.
In Info PPWR: packaging parts are kept with a material from the code list (material code, weight, count, recycled content share, waste code and sorting mark). The label can be generated from this data as soon as the Commission publishes the implementing acts; changes to legislation are tracked by a weekly check.
One data carrier for everything
If another EU regulation requires digital information on a data carrier for a packaged product (for example a digital product passport), the PPWR packaging information is to be on the same carrier. It therefore pays to plan one QR code with a permanent address that you keep adding to. The mandatory packaging details must not be mixed with advertising.
In Info PPWR: the QR code has a permanent address on the system's domain or on the company's own domain. The mandatory packaging details are at the top, separate from product information. The page content can be extended without reprinting. A machine-readable output in JSON-LD and linkset formats is also available for e-shops, recyclers and authorities.
What to do now
- Check that packaging placed on the market from 12 Aug 2026 carries a type or batch and the manufacturer's details.
- Prepare the technical documentation and the EU declaration of conformity and keep them for 5 years (10 years after placing on the market for reusable packaging).
- At the next graphics change, reserve space for the future harmonised label and QR code.
- Check with the EKO-KOM system how packaging identification will be handled in the extended producer responsibility scheme from February 2027.
- For reusable packaging, prepare the reuse-system details for the QR code.
- Keep proof of the date packaging was placed on the market, especially for stock that will be sold off.
Frequently asked questions
Do I need a new sorting label on packaging from August 2026? No. The harmonised label is mandatory from 12 August 2028 at the earliest, or later if the Commission publishes the implementing acts late. From 12 August 2026, however, packaging must carry identification (type, batch or serial number) and the manufacturer's details.
Is a QR code on packaging mandatory? Generally no. But if you want an extended producer responsibility symbol on the packaging, from 12 Feb 2027 a QR code or another digital carrier is the only permitted way. For reusable packaging, the QR code will be mandatory from 12 Feb 2029, or later.
Must the manufacturer hold the technical documentation itself, or is a link to the supplier enough? The manufacturer must hold the technical documentation itself and, on request, provide it to the market surveillance authority within ten days. Supplier documents belong in it, but a link to their own documentation is not enough.
Note
This overview is indicative and does not replace legal advice. Dates after 2027 depend on Commission implementing acts. The text of Regulation (EU) 2025/40 and the guidance of the competent authorities and the extended producer responsibility scheme are decisive. Info PPWR does not declare conformity with the PPWR: it helps you record data and prepare documents, and the declaration is issued and signed by the manufacturer.